Waters 2489, Overview And Maintenance Manual

Page: 10 / 150

June 11, 2015, 715004752 Rev. A
Page x
1.3.6 MaxPlot.......................................................................................... 26
1.3.7 Thermal-wander management........................................................... 26
2 Installing the Detector ............................................................. 27
2.1 Before you begin ...................................................................................... 27
2.2 Unpacking and inspecting .......................................................................... 27
2.2.1 Unpacking the detector .................................................................... 27
2.2.2 Inspecting the detector .................................................................... 28
2.3 Selecting a laboratory site ......................................................................... 28
2.4 Stacking system modules .......................................................................... 29
2.5 Connecting to the electricity source ............................................................. 30
2.6 Connecting signal cables ............................................................................ 31
2.6.1 Connecting I/O cables ...................................................................... 32
2.6.2 Connecting signal cables from the rear panel and Ethernet connectors to the
detector......................................................................................... 33
2.6.3 Making Ethernet connections............................................................. 33
2.6.4 Starting a method ........................................................................... 35
2.6.5 Turning the detector lamp on or off .................................................... 36
2.6.6 Connecting the detector to the 2695 separations module ...................... 36
2.6.7 Connecting the detector to a chromatography data workstation using an
e-SAT/IN module ............................................................................ 38
2.6.8 Connecting the detector to a 745/745B/746 data module...................... 41
2.6.9 Connecting the detector to a fraction collector ..................................... 42
2.7 Plumbing the detector ............................................................................... 43
2.7.1 Connecting columns in HPLC systems ................................................. 44
2.7.2 Connecting columns in ACQUITY Arc systems ...................................... 44
2.7.3 Assembling the fittings (HPLC only).................................................... 45
2.7.4 Making tubing connections in HPLC systems ........................................ 45
2.7.5 Making tubing connections in ACQUITY Arc systems ............................. 45
3 Prepare the Detector ............................................................... 47
3.1 Initializing the detector .............................................................................. 47
3.1.1 Diagnostic test failure ...................................................................... 48
3.1.2 Idle mode....................................................................................... 48
3.2 Using the operator interface ....................................................................... 49
3.2.1 Using the display ............................................................................. 49
3.2.2 Using the keypad............................................................................. 51
3.2.3 Navigating the user interface ............................................................ 55