June 11, 2015, 715004752 Rev. A
Page 63
Figure 3–8:
Scaled trace for 60 minutes of continuous injections, with AU1
changed to 1
The figure below shows a 60-minute trace on channel B scaled to the last 45 minutes.
T1 is changed to –45.
Figure 3–9:
Scaled trace changing T1 to –45
As you modify the output using the Scale function, the Trace function continues to
display the detector output in real time on either or both channels.
3.2.5 Operating other detector functions
3.2.5.1
Configuring the detector
To change default configurations, use the Configuration screens.
Press the CONFIGURE key (Shift DIAG). The first of three Configuration screens
appears.
Tip:
Other functions, such as specifying event inputs and enabling pulse periods, are
activated from the Configuration screens.
Figure 3–10: Configuration screens
Requirement:
To prevent acquisition of incorrect data when operating the detector
in dual-wavelength mode under the control of Empower software or MassLynx
software, you must select a data sampling rate of 1 point per second.
Configuration screen 1 of 3
Configuration screen 2 of 3
Configuration screen 3 of 3
Summary of Contents for 2489
