June 11, 2015, 715004752 Rev. A
Page 77
To clear one or more methods:
1. Return to the Method choice list by pressing METHOD (Shift A/B).
2. Press 5, Reset method *.
Result:
A message appears, asking whether you approve of setting current
conditions to factory defaults.
Tip:
If you press Enter, these events take place:
•
All timed events are deleted.
•
All threshold events are disabled.
•
All other operating parameters of the method (
λ
, AUFS, etc.) are set to
defaults.
If you press Cancel (Shift 0), the display returns to the Method choice list.
Recommendation:
To prevent loss of the current conditions, store them in
one of the available storage slots before you clear the method. After clearing the
storage slots, you can restore the previous conditions.
3. Press 4, Store method, and enter a storage location number.
Tip:
To clear other stored methods, repeat this step until you clear all desired
methods.
When you press HOME, the absorbance screen’s method number icon displays an
asterisk.
3.2.10.8 Clearing events
You can clear only timed or threshold events without resetting any other operating
parameters.
To clear all active timed or threshold events:
1. Return to the Method choice list by pressing METHOD (Shift A/B).
2. Press 6, Clear events.
Result:
A message appears asking whether you approve of clearing all active
events.
Tip:
If you press Enter,
•
all timed and threshold events in the method are cleared;
•
all other operating parameters of the method (
λ
, AUFS, etc.) are
unaffected.
If you press Cancel (Shift 0), the Method choice list appears.
3. When you press HOME, the absorbance screen’s method number icon displays
an asterisk.
Summary of Contents for 2489
