manualshive.com logo in svg

Toyota COROLLA iM 2017, Service Manual, Page: 91 / 384

Share
Download
Toyota COROLLA iM 2017 Service Manual Download Page 91

91

3-2. Opening, closing and locking the doors

3

Op
eration

 o

f each

 compo

nen

t

COROLLA iM_U (OM12K64U)

■

Door lock switch

→

P. 89

■

Wireless remote control

→

P. 88

■

Key

→

P. 88

Raise the back door while pushing
up the back door opener switch.

The back door cannot be closed
immediately after the back door
opener switch is pushed.

■

Operation signals

A buzzer sounds and the emergency flashers flash to indicate that the doors
have been locked/unlocked using the wireless remote control. (Locked: once;
Unlocked: twice)

■

Open door warning buzzer

If a door or the back door is not fully closed, a buzzer will sound when the
vehicle speed reaches 3 mph (5 km/h).

The open door(s) or back door is indicated on the multi-information display.

Back door

The back door can be locked/unlocked and opened by the fol-
lowing procedures.

Unlocking and locking the back door

Opening the back door

Summary of Contents for COROLLA iM 2017

































































































































































































































































































































































































Reviews:

No comments