manualshive.com logo in svg

Toyota COROLLA iM 2017, Service Manual, Page: 189 / 384

Share
Download
Toyota COROLLA iM 2017 Service Manual Download Page 189

189

4-6. Using the driving support systems

4

Drivin

g

COROLLA iM_U (OM12K64U)

■

Operating conditions of hill-start assist control

When the following four conditions are met, the hill-start assist control will
operate:

●

Vehicles with a continuously variable transmission: The shift lever is in a
position other than P or N (when starting off forward/backward on an upward
incline).

●

Vehicles with a manual transmission: The shift lever is in a position other
than R when starting off forward on an upward incline or in R when starting
off backward on an upward incline.

●

The vehicle is stopped.

●

The accelerator pedal is not depressed.

●

The parking brake is not engaged.

■

Automatic system cancelation of hill-start assist control

The hill-start assist control will turn off in any of the following situations:

●

Vehicles with a continuously variable transmission: The shift lever is moved
to P or N.

●

Vehicles with a manual transmission: The shift lever is shifted to R when
starting off forward on an upward incline or from R when starting off back-
ward on an upward incline.

●

The accelerator pedal is depressed.

●

The parking brake is engaged.

●

Approximately 2 seconds elapse after the brake pedal is released.

Summary of Contents for COROLLA iM 2017

































































































































































































































































































































































































Reviews:

No comments