manualshive.com logo in svg

Toyota COROLLA iM 2017, Service Manual, Page: 231 / 384

Share
Download
Toyota COROLLA iM 2017 Service Manual Download Page 231

231

6-2. Maintenance

6

Mainten

ance an

d ca

re

COROLLA iM_U (OM12K64U)

Vehicle exterior

Items

Check points

Doors

• Do the doors operate smoothly?

Engine hood

• Does the engine hood lock system

work properly?

Fluid leaks

• There should not be any signs of

fluid leakage after the vehicle has
been parked.

Tires

• Is the tire inflation pressure cor-

rect?

• The tires should not be dam-

aged or excessively worn.

• Have the tires been rotated

according to the maintenance
schedule?

• The wheel nuts should not be

loose.

Windshield wipers/rear window
wiper

• The wiper blades should not show

any signs of cracking, splitting,
wear, contamination or deforma-
tion.

• The wiper blades should clear the

windshield/rear window without
streaking or skipping.

WARNING

■

If the engine is running

Turn the engine off and ensure that there is adequate ventilation before per-
forming maintenance checks.

Summary of Contents for COROLLA iM 2017

































































































































































































































































































































































































Reviews:

No comments