manualshive.com logo in svg

Toyota COROLLA iM 2017, Service Manual, Page: 24 / 384

Share
Download
Toyota COROLLA iM 2017 Service Manual Download Page 24

24

1-1. For safe use

COROLLA iM_U (OM12K64U)

Adjust the angle of the seat-
back so that you are sitting
straight up and so that you do
not have to lean forward to
steer. (

→

P. 95)

Adjust the seat so that you can
depress the pedals fully and so
that your arms bend slightly at
the elbow when gripping the
steering wheel. (

→

P. 95)

Lock the head restraint in place with the center of the head restraint
closest to the top of your ears. (

→

P. 98)

Wear the seat belt correctly. (

→

P. 26)

Make sure that all occupants are wearing their seat belts before driv-
ing the vehicle. (

→

P. 26)

Use a child restraint system appropriate for the child until the child
becomes large enough to properly wear the vehicle’s seat belt. 
(

→

P. 52)

For safety drive

For safe driving, adjust the seat and mirror to an appropriate
position before driving.

Correct driving posture

1

2

Correct use of the seat belts

3

4

Summary of Contents for COROLLA iM 2017

































































































































































































































































































































































































Reviews:

No comments