manualshive.com logo in svg

Toyota COROLLA iM 2017, Service Manual, Page: 56 / 384

Share
Download
Toyota COROLLA iM 2017 Service Manual Download Page 56

56

1-1. For safe use

COROLLA iM_U (OM12K64U)

Child restraint LATCH anchors
(

→

P. 57)

LATCH anchors are provided for
the outboard rear seats. (Buttons
displaying the location of the
anchors are attached to the seats.) 

Installation with a seat belt 
(

→

P. 59)

Anchor brackets (for top tether
strap) (

→

P. 62)

An anchor bracket is provided for
each rear seat.

Installing child restraints

Follow the child restraint system manufacturer's instructions.
Firmly secure child restraints to the seats using the LATCH
anchors or a seat belt. Attach the top tether strap when installing
a child restraint.

The lap/shoulder belt can be used if your child restraint system
is not compatible with the LATCH (Lower Anchors and Tethers
for Children) system.

Summary of Contents for COROLLA iM 2017

































































































































































































































































































































































































Reviews:

No comments