Toyota COROLLA iM 2017 Service Manual Download Page 55 | Manualshive

Page: 55 / 384

Toyota COROLLA iM 2017 Service Manual Download Page 55

55

1-1. For safe use

1

Fo
r

safety and securi

ty

COROLLA iM_U (OM12K64U)

WARNING

■

When children are in the vehicle

Do not allow children to play with the seat belt. If the seat belt becomes
twisted around a child’s neck, it may lead to choking or other serious injuries
that could result in death.
If this occurs and the buckle cannot be unfastened, scissors should be used
to cut the belt.

■

When the child restraint system is not in use

●

Keep the child restraint system properly secured on the seat even if it is
not in use. Do not store the child restraint system unsecured in the pas-
senger compartment.

●

If it is necessary to detach the child restraint system, remove it from the
vehicle or store it securely in the luggage compartment. If a head restraint
was removed when installing a child restraint system, always install the
head restraint before driving. This will prevent it from injuring passengers
in the event of a sudden stop or accident.

«
...
53
54
55
56
57
...
»

Summary of Contents for COROLLA iM 2017

































































































































































































































































































































































































Reviews:

No comments