manualshive.com logo in svg

Toyota COROLLA iM 2017, Service Manual, Page: 77 / 384

Share
Download
Toyota COROLLA iM 2017 Service Manual Download Page 77

77

2. Instrument cluster

2

Instrum

e

nt clus

ter

COROLLA iM_U (OM12K64U)

Settings display (

→

P. 80)

Select to change the meter display settings and other settings.

◆

Changing the display

To change the displayed item,
press the “TRIP” switch.

Each time the switch is pressed,
the displayed item will be
changed.

◆

Display items

■

Odometer

Displays the total distance the vehicle has been driven.

■

Trip meter A/trip meter B

Displays the distance the vehicle has been driven since the meter
was last reset. Trip meters A and B can be used to record and dis-
play different distances independently. 

To reset, display the desired trip meter and press and hold the “TRIP”
switch.

■

Meter light control

Displays the meter light control display.

• The brightness of the meters can be adjusted individually for day mode

and night mode

*

.

• If the brightness of the meters is adjusted when the tail lights are on, the

brightness of the clock and other items will also be adjusted.

• To adjust the brightness, display the meter light control display and

press and hold the “TRIP” switch.

*

: Day mode and night mode: 

→

P. 81

Trip information/Meter light control 

Summary of Contents for COROLLA iM 2017

































































































































































































































































































































































































Reviews:

No comments