manualshive.com logo in svg

Toyota COROLLA iM 2017, Service Manual, Page: 201 / 384

Share
Download
Toyota COROLLA iM 2017 Service Manual Download Page 201

201

5-1. Using the air conditioning system and defogger

5

In

te

rior fe

atures

COROLLA iM_U (OM12K64U)

Open the vent

Close the vent

■

Using automatic mode

Fan speed is adjusted automatically according to the temperature setting and
the ambient conditions.

Therefore, the fan may stop for a while until warm or cool air is ready to flow

immediately after 

 is pressed.

■

Fogging up of the windows

●

The windows will easily fog up when the humidity in the vehicle is high.

Turning 

 on will dehumidify the air from the outlets and defog the wind-

shield effectively.

●

If you turn 

 off, the windows may fog up more easily.

●

The windows may fog up if the recirculated air mode is used.

■

Outside/recirculated air mode

●

When driving on dusty roads such as tunnels or in heavy traffic, set the out-
side/recirculated air mode button to the recirculated air mode. This is effec-
tive in preventing outside air from entering the vehicle interior. During
cooling operation, setting the recirculated air mode will also cool the vehicle
interior effectively.

●

Outside/recirculated air mode may automatically switch depending on the
temperature setting or the inside temperature. 

■

When the outside temperature exceeds 75°F (24°C) and the air condition-
ing system is on

●

In order to reduce the air conditioning power consumption, the air condition-
ing system may switch to recirculated air mode automatically. This may also
reduce fuel consumption.

●

Recirculated air mode is selected as a default mode when the engine switch
is turned to the “ON” position.

●

It is possible to switch to outside air mode at any time by pressing 

 .

1
2

Summary of Contents for COROLLA iM 2017

































































































































































































































































































































































































Reviews:

No comments