manualshive.com logo in svg

Toyota COROLLA iM 2017, Service Manual, Page: 216 / 384

Share
Download
Toyota COROLLA iM 2017 Service Manual Download Page 216

216

5-4. Other interior features

COROLLA iM_U (OM12K64U)

Please use as a power supply for electronic goods that use less than
12 VDC/10 A (power consumption of 120 W).

Pull the lid to open it, then open
the cover.

The power outlet can be used when the engine switch is in the “ACC” or “ON”
position. 

Fold down the armrest for use.

Power outlet

NOTICE

●

To avoid damaging the power outlet, close the power outlet cover when
the power outlet is not in use. Foreign objects or liquids that enter the
power outlet may cause a short circuit.

●

To prevent battery discharge, do not use the power outlet longer than nec-
essary when the engine is off.

Armrest

NOTICE

To prevent damage to the armrest, do not apply too much load on the arm-
rest.

Summary of Contents for COROLLA iM 2017

































































































































































































































































































































































































Reviews:

No comments