manualshive.com logo in svg

Toyota COROLLA iM 2017, Service Manual, Page: 198 / 384

Share
Download
Toyota COROLLA iM 2017 Service Manual Download Page 198

198

5-1. Using the air conditioning system and defogger

COROLLA iM_U (OM12K64U)

Press .

The dehumidification function begins to operate. Air outlets and fan
speed are automatically adjusted according to the temperature set-
ting.

Adjust the temperature setting.

To stop the operation, press 

.

■

Automatic mode indicator

If the fan speed setting or air flow modes are operated, the auto-
matic mode indicator goes off. However, automatic mode for func-
tions other than that operated is maintained.

■

Adjusting the temperature for driver and passenger seats sep-
arately

To turn on the dual control mode, perform any of the following pro-
cedures:

●

Press .

●

Adjust the passenger’s side temperature setting.

The indicator comes on when the dual control mode is on.

Using automatic mode

1

2

3

Summary of Contents for COROLLA iM 2017

































































































































































































































































































































































































Reviews:

No comments