Toyota COROLLA iM 2017 Service Manual Download Page 372

Page: 372 / 384

372

What to do if... (Troubleshooting)

COROLLA iM_U (OM12K64U)

●

The seat belt reminder light is flashing
Are the driver and the front passenger wearing the seat belts? (

→

P. 293)

●

The brake system warning light is on
Is the parking brake released? (

→

P. 140)

Depending on the situation, other types of warning buzzer may also sound.
(

→

P. 292, 300)

●

When a warning light turns on or a warning message is displayed, refer to
P. 292, 300.

●

Stop the vehicle in a safe place and replace the flat tire with the spare tire.
(

→

P. 303)

●

Try the procedure for when the vehicle becomes stuck in mud, dirt, or
snow. (

→

P. 321)

A warning buzzer sounds during driving

A warning light turns on or a warning message is displayed

When a problem has occurred

If you have a flat tire

The vehicle becomes stuck

Summary of Contents for COROLLA iM 2017

































































































































































































































































































































































































Search results

Summary of Contents for COROLLA iM 2017

Reviews:

Toyota COROLLA iM 2017, Service Manual, Page: 372 / 384

Search results

Summary of Contents for COROLLA iM 2017

Reviews: