manualshive.com logo in svg

Toyota COROLLA iM 2017, Service Manual, Page: 158 / 384

Share
Download
Toyota COROLLA iM 2017 Service Manual Download Page 158

158

4-5. Using the driving support systems

COROLLA iM_U (OM12K64U)

The pre-collision system is equipped with a sophisticated computer
that will record certain data, such as:

• How far (if at all) the driver was depressing the accelerator and/or

brake pedal

• How fast the vehicle was traveling
• Operation status of the pre-collision system functions
• Information (such as the distance and relative speed between your

vehicle and the vehicle ahead or other objects)

• Images from the front sensor (available only when the pre-collision

braking function is operating)

The pre-collision system does not record conversations, sounds or
images of the inside of the vehicle.

●

Data usage

Toyota may use the data recorded in this computer to diagnose
malfunctions, conduct research and development, and improve
quality.

Toyota will not disclose the recorded data to a third party except:

• With the consent of the vehicle owner or with the consent of the

lessee if the vehicle is leased

• In response to an official request by the police, a court of law or a

government agency

• For use by Toyota in a lawsuit
• For research purposes where the data is not tied to a specific

vehicle or vehicle owner

●

Recorded image information can be erased using a specialized
device.

The image information recording function can be disabled. How-
ever, if the function is disabled, data from when the pre-collision
system operates will not be available.

Vehicle data recordings

Summary of Contents for COROLLA iM 2017

































































































































































































































































































































































































Reviews:

No comments