Toyota COROLLA iM 2017 Service Manual Download Page 52 | Manualshive

Page: 52 / 384

Toyota COROLLA iM 2017 Service Manual Download Page 52

52

1-1. For safe use

COROLLA iM_U (OM12K64U)

Studies have shown that installing a child restraint on a rear seat is
much safer than installing one on the front passenger seat.

●

Choose a child restraint system that suits your vehicle and is appro-
priate to the age and size of the child.

●

For installation details, follow the instructions provided with the child
restraint system.
General installation instructions are provided in this manual.
(

Child restraint systems

A child restraint system for a small child or baby must itself be
properly restrained on the seat with the LATCH anchors or the
lap portion of the lap/shoulder belt.

The laws of all 50 states of the U.S.A. and Canada now require
the use of child restraint systems.

Points to remember

«
...
50
51
52
53
54
...
»

Summary of Contents for COROLLA iM 2017

































































































































































































































































































































































































Reviews:

No comments