manualshive.com logo in svg

Toyota COROLLA iM 2017, Service Manual, Page: 249 / 384

Share
Download
Toyota COROLLA iM 2017 Service Manual Download Page 249

249

6-3. Do-it-yourself maintenance

6

Mainten

ance an

d ca

re

COROLLA iM_U (OM12K64U)

If any washer does not work or
“Windshield Washer Fluid Low” is
displayed on the multi-information
display, the washer fluid tank may
be empty. Add washer fluid.

Washer fluid

WARNING

■

When adding washer fluid

Do not add washer fluid when the engine is hot or running as washer fluid
contains alcohol and may catch fire if spilled on the engine etc.

NOTICE

■

Do not use any fluid other than washer fluid 

Do not use soapy water or engine antifreeze instead of washer fluid.
Doing so may cause streaking on the vehicle’s painted surfaces.

■

Diluting washer fluid

Dilute washer fluid with water as necessary. 
Refer to the freezing temperatures listed on the label of the washer fluid bot-
tle.

Summary of Contents for COROLLA iM 2017

































































































































































































































































































































































































Reviews:

No comments