manualshive.com logo in svg

Toyota COROLLA iM 2017, Service Manual, Page: 57 / 384

Share
Download
Toyota COROLLA iM 2017 Service Manual Download Page 57

57

1-1. For safe use

1

Fo
r 

safety and securi

ty

COROLLA iM_U (OM12K64U)

If your child restraint system interferes with a head restraint and
cannot be installed properly, install the child restraint system after
removing the head restraint. (

→

P. 99)

Widen the gap between the seat cushion and seatback slightly.

Type A

Latch the hooks of the lower
straps onto the LATCH
anchors.

If the child restraint has a top
tether strap, the top tether strap
should be latched onto the top
tether strap anchor. (

→

P. 62)

For owners in Canada:
The symbol on a child restraint
system indicates the presence
of a lower connector system.

Installation with LATCH system

1

2

Canada only

3

Summary of Contents for COROLLA iM 2017

































































































































































































































































































































































































Reviews:

No comments