manualshive.com logo in svg

Toyota COROLLA iM 2017, Service Manual, Page: 99 / 384

Share
Download
Toyota COROLLA iM 2017 Service Manual Download Page 99

99

3-3. Adjusting the seats

3

Op
eration

 o

f each

 compo

nen

t

COROLLA iM_U (OM12K64U)

■

Removing the head restraints

Front seats and rear center seat

Rear outside seats

■

Installing the head restraints

Front seats

Rear center seat

Pull the head restraint up while pressing
the lock release button.

Pull the head restraint up while pressing
the lock release buttons.

Align the head restraint with the installa-
tion holes and push it down to the lock
position.
Press and hold the lock release button
when lowering the head restraint.

Align the head restraint with the installa-
tion holes and push it down to the lowest
lock position while pressing the lock
release button.

Lock release button

Lock release buttons

Lock release button

Lock release button

Summary of Contents for COROLLA iM 2017

































































































































































































































































































































































































Reviews:

No comments