manualshive.com logo in svg

Toyota COROLLA iM 2017, Service Manual, Page: 268 / 384

Share
Download
Toyota COROLLA iM 2017 Service Manual Download Page 268

268

6-3. Do-it-yourself maintenance

COROLLA iM_U (OM12K64U)

■

Use a CR1620 lithium battery

●

Batteries can be purchased at your Toyota dealer, local electrical appliance
shops or camera stores.

●

Replace only with the same or equivalent type recommended by the manu-
facturer.

●

Dispose of used batteries according to local laws.

■

If the key battery is depleted 

The following symptoms may occur:

●

The wireless remote control will not function properly.

●

The operational range will be reduced.

WARNING

■

Removed battery and other parts

These parts are small and if swallowed by a child, they can cause choking.
Keep away from children. Failure to do so could result in death or serious
injury.

NOTICE

■

For normal operation after replacing the battery

Observe the following precautions to prevent accidents:

●

Always work with dry hands.
Moisture may cause the battery to rust.

●

Do not touch or move any other component inside the remote control.

●

Do not bend either of the battery terminals.

Summary of Contents for COROLLA iM 2017

































































































































































































































































































































































































Reviews:

No comments