Toyota COROLLA iM 2017 Service Manual Download Page 87

Page: 87 / 384

3-1. Key information

Op
eration

f each

compo

nen

COROLLA iM_U (OM12K64U)

NOTICE

■

To prevent key damage

●

Do not drop the keys, subject them to strong shocks or bend them.

●

Do not expose the keys to high temperatures for long periods of time.

●

Do not get the keys wet or wash them in an ultrasonic washer etc.

●

Do not attach metallic or magnetic materials to the keys or place the keys
close to such materials.

●

Do not disassemble the keys.

●

Do not attach a sticker or anything else to the surface of the key.

Summary of Contents for COROLLA iM 2017

































































































































































































































































































































































































Search results

Summary of Contents for COROLLA iM 2017

Reviews:

Toyota COROLLA iM 2017, Service Manual, Page: 87 / 384

Search results

Summary of Contents for COROLLA iM 2017

Reviews: