manualshive.com logo in svg

Toyota COROLLA iM 2017, Service Manual, Page: 175 / 384

Share
Download
Toyota COROLLA iM 2017 Service Manual Download Page 175

175

4-5. Using the driving support systems

4

Drivin

g

COROLLA iM_U (OM12K64U)

■

If the PCS warning light flashes or illuminates and a warning message is
displayed on the multi-information display

The pre-collision system may be temporarily unavailable or there may be a
malfunction in the system.

●

In the following situations, the warning light will turn off, the message will
disappear and the system will become operational when normal operating
conditions return:

• When the area around the front sensor is hot, such as in the sun
• When the windshield is fogged up or covered with condensation or ice

(

→

P. 199)

• When the front sensor or the area around either sensor is cold, such as in

an extremely cold environment

• If the area in front of the front sensor is obstructed, such as when the

hood is open

●

If the PCS warning light continues to flash or illuminate or the warning mes-
sage does not disappear, the system may be malfunctioning. Have the vehi-
cle inspected by your Toyota dealer immediately.

■

If VSC is disabled

●

If TRAC and VSC are disabled (

→

P. 188), the pre-collision brake assist and

pre-collision braking functions are also disabled. However, the pre-collision
warning function will still operate.

●

The PCS warning light illuminates and “VSC Turned Off Pre-Collision Brake
System Unavailable” is displayed on the multi-information display.

Summary of Contents for COROLLA iM 2017

































































































































































































































































































































































































Reviews:

No comments