manualshive.com logo in svg

Toyota COROLLA iM 2017, Service Manual, Page: 187 / 384

Share
Download
Toyota COROLLA iM 2017 Service Manual Download Page 187

187

4-6. Using the driving support systems

4

Drivin

g

COROLLA iM_U (OM12K64U)

The slip indicator light will flash
while the TRAC or VSC system is
operating.

If the vehicle gets stuck in mud, dirt or snow, the TRAC system may

reduce power from the engine to the wheels. Pressing 

 to turn

the system off may make it easier for you to rock the vehicle in order
to free it.

To turn the TRAC system off,

quickly press and release 

.

The “Traction Control Turned Off”
will be shown on the multi-informa-
tion display. 

Press 

 again to turn the sys-

tem back on.

When the TRAC or VSC system is operating

Disabling the TRAC system

Summary of Contents for COROLLA iM 2017

































































































































































































































































































































































































Reviews:

No comments