manualshive.com logo in svg

Toyota COROLLA iM 2017, Service Manual, Page: 110 / 384

Share
Download
Toyota COROLLA iM 2017 Service Manual Download Page 110

110

COROLLA iM_U (OM12K64U)

4-1. Before driving

→

P. 128

Continuously variable transmission

With the brake pedal depressed, shift the shift lever to D. 
(

→

P. 131)

Release the parking brake. (

→

P. 140)

Gradually release the brake pedal and gently depress the accel-
erator pedal to accelerate the vehicle.

Manual transmission

While depressing the clutch pedal, shift the shift lever to 1. 
(

→

P. 137)

Release the parking brake. (

→

P. 140)

Gradually release the clutch pedal. At the same time, gently
depress the accelerator pedal to accelerate the vehicle.

Continuously variable transmission

With the shift lever in D, depress the brake pedal.

If necessary, set the parking brake.

If the vehicle is to be stopped for an extended period of time, shift the
shift lever to P or N. (

→

P. 131)

Manual transmission

While depressing the clutch pedal, depress the brake pedal.

If necessary, set the parking brake.

If the vehicle is to be stopped for an extended period of time, shift the
shift lever to N. (

→

P. 137)

Driving the vehicle

The following procedures should be observed to ensure safe
driving: 

Starting the engine

Driving

Stopping

1

2
3

1

2
3

1
2

1
2

Summary of Contents for COROLLA iM 2017

































































































































































































































































































































































































Reviews:

No comments