manualshive.com logo in svg

Toyota COROLLA iM 2017, Service Manual, Page: 303 / 384

Share
Download
Toyota COROLLA iM 2017 Service Manual Download Page 303

303

7-2. Steps to take in an emergency

7

Wh

en tro

uble

 a

ris

es

COROLLA iM_U (OM12K64U)

●

Stop the vehicle in a safe place on a hard, flat surface.

●

Set the parking brake.

●

Shift the shift lever to P (continuously variable transmission) or R
(manual transmission).

●

Stop the engine.

●

Turn on the emergency flashers. (

→

P. 282)

If you have a flat tire

Your vehicle is equipped with a spare tire. The flat tire can be
replaced with the spare tire.

For details about tires: 

→

P. 250

WARNING

■

If you have a flat tire

Do not continue driving with a flat tire.
Driving even a short distance with a flat tire can damage the tire and the
wheel beyond repair, which could result in an accident.

Before jacking up the vehicle

Summary of Contents for COROLLA iM 2017

































































































































































































































































































































































































Reviews:

No comments