Toyota COROLLA iM 2017 Service Manual Download Page 197

Page: 197 / 384

197

5-1. Using the air conditioning system and defogger

rior fe

atures

COROLLA iM_U (OM12K64U)

■

Fan speed setting

Increases the fan speed

Decreases the fan speed

■

Change the airflow mode

To change the airflow mode,
move the airflow change knob
upward or downward.

The air outlets used are
changed each time the knob is
operated.

Air flows to the upper body.

Air flows to the upper body
and feet.

Air flows to the feet.

Air flows to the feet and the
windshield defogger oper-
ates.

1
2

Airflow change knob

1
2

3
4

Summary of Contents for COROLLA iM 2017

































































































































































































































































































































































































Search results

Summary of Contents for COROLLA iM 2017

Reviews:

Toyota COROLLA iM 2017, Service Manual, Page: 197 / 384

Search results

Summary of Contents for COROLLA iM 2017

Reviews: