manualshive.com logo in svg

Toyota COROLLA iM 2017, Service Manual, Page: 179 / 384

Share
Download
Toyota COROLLA iM 2017 Service Manual Download Page 179

179

4-5. Using the driving support systems

4

Drivin

g

COROLLA iM_U (OM12K64U)

■

Operation conditions

This function operates when all of the following conditions are met.

●

LDA is turned on.

●

Vehicle speed is approximately 32 mph (50 km/h) or more.

●

System recognizes white (yellow) lines.

●

Width of traffic lane is approximately 9.8 ft. (3 m) or more.

●

Turn signal lever is not operated.

●

Vehicle is driven on a straight road or around a gentle curve with a radius of
more than approximately 492 ft. (150 m).

●

No system malfunctions are detected. (

→

P. 292)

■

Temporary cancellation of functions

When operation conditions are no longer met, a function may be temporarily
canceled. However, when the operation conditions are met again, operation
of the function is automatically restored.

■

Lane departure alert function

The warning buzzer may be difficult to hear due to external noise, audio play-
back, etc.

■

White (yellow) lines are only on one side of road

The LDA system will not operate for the side on which white (yellow) lines
could not be recognized.

■

After the vehicle has been parked in the sun

The LDA system may not be available and a warning message may be dis-
played for a while after starting off. When the temperature in the cabin
decreases and the temperature around the front sensor (

→

P. 159) becomes

suitable for its operation, the system will begin to operate.

■

If there are lane markers on only one side of the vehicle

The lane departure warning will not operate for the side on which lane mark-
ers could not be recognized.

Summary of Contents for COROLLA iM 2017

































































































































































































































































































































































































Reviews:

No comments