Toyota COROLLA iM 2017 Service Manual Download Page 269

Page: 269 / 384

269

6-3. Do-it-yourself maintenance

Mainten

ance an

d ca

COROLLA iM_U (OM12K64U)

Turn the engine switch off.

Open the fuse box cover.



Engine compartment

Push the tab in and lift the lid
off.



Under the driver’s side instrument panel

Remove the lid.

Remove the fuse with the pull-
out tool.

Only type A fuses can be removed
using the pullout tool.

Checking and replacing fuses

If any of the electrical components do not operate, a fuse may
have blown. If this happens, check and replace the fuses as nec-
essary.

1
2

Summary of Contents for COROLLA iM 2017

































































































































































































































































































































































































Search results

Summary of Contents for COROLLA iM 2017

Reviews:

Toyota COROLLA iM 2017, Service Manual, Page: 269 / 384

Search results

Summary of Contents for COROLLA iM 2017

Reviews: