manualshive.com logo in svg

Toyota COROLLA iM 2017, Service Manual, Page: 151 / 384

Share
Download
Toyota COROLLA iM 2017 Service Manual Download Page 151

151

4-3. Operating the lights and wipers

4

Drivin

g

COROLLA iM_U (OM12K64U)

The wiper operation is selected by moving the lever as follows:

*

1

 or 

*

2

Intermittent window
wiper operation

*

1

 or 

*

2

Normal window wiper
operation

*

1

: For  U.S.A.

*

2

: For Canada

Washer/wiper dual operation

The wiper will automatically oper-
ate a couple of times after the
washer squirts.

■

The rear window wiper and washer can be operated when

The engine switch is in the “ON” position.

■

If no windshield washer fluid sprays

Check that the washer nozzle is not blocked if there is washer fluid in the
windshield washer fluid reservoir.

Rear window wiper and washer

Operating instructions

1

2

3

Summary of Contents for COROLLA iM 2017

































































































































































































































































































































































































Reviews:

No comments