manualshive.com logo in svg

Toyota COROLLA iM 2017, Service Manual, Page: 73 / 384

Share
Download
Toyota COROLLA iM 2017 Service Manual Download Page 73

73

2. Instrument cluster

2

Instrum

e

nt clus

ter

COROLLA iM_U (OM12K64U)

*

5

: When the outside temperature is approximately 37°F (3°C) or lower, the

indicator will flash for approximately 10 seconds, then stay on.

*

6

: If equipped

*

7

: The light comes on when the system is turned off.

WARNING

■

If a safety system warning light does not come on 

Should a safety system light such as the ABS and SRS warning lights not
come on when you start the engine, this could mean that these systems are
not available to help protect you in an accident, which could result in death
or serious injury. Have the vehicle inspected by your Toyota dealer immedi-
ately if this occurs.

Summary of Contents for COROLLA iM 2017

































































































































































































































































































































































































Reviews:

No comments