manualshive.com logo in svg

Toyota COROLLA iM 2017, Service Manual, Page: 140 / 384

Share
Download
Toyota COROLLA iM 2017 Service Manual Download Page 140

140

4-2. Driving procedures

COROLLA iM_U (OM12K64U)

To set the parking brake, fully
pull the parking brake lever
while depressing the brake
pedal.

To release the parking brake,
slightly raise the lever and
lower it completely while press-
ing the button.

*

1

: For  U.S.A.

*

2

: For Canada

■

Parking the vehicle

→

P. 111

■

Parking brake engaged warning buzzer

If the vehicle is driven at a speed of approximately 3 mph (5 km/h) or more
with the parking brake engaged, a buzzer will sound.
“Release Parking Brake.” will be displayed on the multi-information display.

■

Usage in winter time

→

P. 192

Parking brake

Operating instructions

*

1

*

2

1

2

NOTICE

■

Before driving

Fully release the parking brake.
Driving the vehicle with the parking brake set will lead to brake components
overheating, which may affect braking performance and increase brake
wear.

Summary of Contents for COROLLA iM 2017

































































































































































































































































































































































































Reviews:

No comments