manualshive.com logo in svg

Toyota COROLLA iM 2017, Service Manual, Page: 86 / 384

Share
Download
Toyota COROLLA iM 2017 Service Manual Download Page 86

86

3-1. Key information

COROLLA iM_U (OM12K64U)

■

Key battery depletion

If the wireless remote control function does not operate, the battery may be
depleted. Replace the battery when necessary. (

→

P. 267)

■

When the key battery is fully depleted

→

P. 267

■

If a wrong key is used

The key cylinder rotates freely, isolated from the internal mechanism.

■

Customization

Settings (e.g. wireless remote control system) can be changed. 
(Customizable features: 

→

P. 349)

■

Certification for the wireless remote control

For vehicles sold in the U.S.A.

FCC ID: HYQ23AAH

NOTE:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interfer-
ence, and (2) this device must accept any interference received, including
interference that may cause undesired operation.

FCC WARNING:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. 

FCC ID: HYQ12BFA

NOTE:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interfer-
ence, and (2) this device must accept any interference received, including
interference that may cause undesired operation.

FCC WARNING:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.

The FCC ID/IC Certification number is affixed inside the equipment. You can
find the ID/number when replacing the battery.

For vehicles sold in Canada

FCC ID: HYQ12BFA

NOTE:
This device complies with Industry Canada's licence-exempt RSSs.
Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.

The FCC ID/IC Certification number is affixed inside the equipment. You can
find the ID/number when replacing the battery.

Summary of Contents for COROLLA iM 2017

































































































































































































































































































































































































Reviews:

No comments