manualshive.com logo in svg

Toyota COROLLA iM 2017, Service Manual, Page: 88 / 384

Share
Download
Toyota COROLLA iM 2017 Service Manual Download Page 88

88

COROLLA iM_U (OM12K64U)

3-2. Opening, closing and locking the doors

◆

Wireless remote control

Locks all the doors

Check that the door is securely
locked.

Unlocks all the doors

Pressing the button unlocks the
driver’s door. Pressing the but-
ton again within 5 seconds
unlocks the other doors.

◆

Key

Turning the key operates the doors as follows: 

Locks all the doors

Unlocks all the doors

Turning the key unlocks the
driver's door. Turning the key
again unlocks the other doors.

■

Operation signals

A buzzer sounds and the emergency flashers flash to indicate that the doors
have been locked/unlocked using the wireless remote control. (Locked: once;
Unlocked: twice)

■

Security feature

If a door is not opened within approximately 60 seconds after the vehicle is
unlocked using the wireless remote control, the security feature automatically
locks the vehicle again. 

■

Door lock buzzer

If an attempt to lock the doors using the wireless remote control is made
when a door is not fully closed, a buzzer will sound continuously for 5 sec-
onds. Fully close the door to stop the buzzer, and lock the doors again.

■

If the wireless remote control does not operate properly

Replace the battery with a new one if it is depleted. (

→

P. 267)

Side doors

Unlocking and locking the doors from the outside

1

2

1
2

Summary of Contents for COROLLA iM 2017

































































































































































































































































































































































































Reviews:

No comments