Toyota COROLLA iM 2017 Service Manual Download Page 229

Page: 229 / 384

229

6-2. Maintenance

Mainten

ance an

d ca

COROLLA iM_U (OM12K64U)

Vehicle interior

Items

Check points

Accelerator pedal

• The accelerator pedal should

move smoothly (without uneven
pedal effort or catching).

Continuously variable transmission
“Park” mechanism

• When parked on a slope and the

shift lever is in P, is the vehicle
securely stopped?

Brake pedal

• Does the brake pedal move

smoothly?

• Does the brake pedal have appro-

priate clearance from the floor?

(

→

P. 331)

• Does the brake pedal have the

correct amount of free play?

(

→

P. 331)

Brakes

• The vehicle should not pull to one

side when the brakes are applied.

• The brakes should work effec-

tively.

• The brake pedal should not feel

spongy.

• The brake pedal should not get

too close to the floor when the
brakes are applied.

Clutch pedal

• Does the clutch pedal move

smoothly?

• Does the clutch pedal have appro-

priate clearance from the floor?

(

→

P. 330)

• Does the clutch pedal have the

correct amount of free play?

(

→

P. 330)

Summary of Contents for COROLLA iM 2017

































































































































































































































































































































































































Search results

Summary of Contents for COROLLA iM 2017

Reviews:

Toyota COROLLA iM 2017, Service Manual, Page: 229 / 384

Search results

Summary of Contents for COROLLA iM 2017

Reviews: