manualshive.com logo in svg

Toyota COROLLA iM 2017, Service Manual, Page: 293 / 384

Share
Download
Toyota COROLLA iM 2017 Service Manual Download Page 293

293

7-2. Steps to take in an emergency

7

Wh

en tro

uble

 a

ris

es

COROLLA iM_U (OM12K64U)

(U.S.A.)

(Canada)

ABS warning light

Indicates a malfunction in:
• The ABS; or
• The brake assist system

→

Have the vehicle inspected by your Toyota dealer
immediately.

Electric power steering system warning light (warning
buzzer)

Indicates a malfunction in the EPS (Electric Power Steer-
ing) system

→

Have the vehicle inspected by your Toyota dealer
immediately.

(Comes on)

Slip indicator

Indicates a malfunction in:
• The VSC (Vehicle Stability Control) system; 
• The TRAC (Traction Control) system; or
• The hill-start assist control system
The light will flash when the VSC or the TRAC

 

system is

operating.

→

Have the vehicle inspected by your Toyota dealer
immediately.

Low fuel level warning light

Indicates that remaining fuel is approximately 2.0 gal. (7.5
L, 1.6 Imp. gal.) or less

→

Refuel the vehicle.

Seat belt reminder light (warning buzzer)

*

2

Warns the driver and/or front passenger to fasten their
seat belts

→

Fasten the seat belt.
If the front passenger’s seat is occupied, the front
passenger’s seat belt also needs to be fastened to
make the warning light (warning buzzer) turn off.

Warning light

Warning light/Details/Actions

Summary of Contents for COROLLA iM 2017

































































































































































































































































































































































































Reviews:

No comments