Toyota COROLLA iM 2017 Service Manual Download Page 328

Page: 328 / 384

328

8-1. Specifications

COROLLA iM_U (OM12K64U)

Cooling system

Capacity



Vehicles with a continuously variable transmission

6.1 qt. (5.8 L, 5.1 Imp. qt.)



Vehicles with a manual transmission

5.9 qt. (5.6 L, 4.9 Imp. qt.)

Coolant type

Use either of the following.

• “Toyota Super Long Life Coolant”
• Similar high-quality ethylene glycol-based non-sili-

cate, non-amine, non-nitrite, and non-borate cool-
ant with long-life hybrid organic acid technology

Do not use plain water alone.

Ignition system

Spark plug

Make

DENSO SC16HR11 or DENSO SC20HR11

Gap

0.043 in. (1.1 mm)

NOTICE

■

Iridium-tipped spark plugs

Use only iridium-tipped spark plugs. Do not adjust spark plug gap.

Summary of Contents for COROLLA iM 2017

































































































































































































































































































































































































Search results

Summary of Contents for COROLLA iM 2017

Reviews:

Toyota COROLLA iM 2017, Service Manual, Page: 328 / 384

Search results

Summary of Contents for COROLLA iM 2017

Reviews: