Home
/
Toyota
/
COROLLA iM 2017
/
Service Manual

Toyota COROLLA iM 2017, Service Manual, Page: 294 / 384

Share

Page: 294 / 384

Toyota COROLLA iM 2017 Service Manual Download Page 294

294

7-2. Steps to take in an emergency

COROLLA iM_U (OM12K64U)

(If equipped)

PCS warning light

When the warning light flashes (and a buzzer sounds):
Indicates a malfunction in the PCS (Pre-Collision system)

→

Have the vehicle inspected by your Toyota dealer
immediately.

When the warning light flashes or illuminates (and a
buzzer does not sound):
Indicates that the PCS (Pre-Collision system) is temporar-
ily unavailable, possibly due to either of the following:
• The part of the windshield around the front sensor being

dirty, fogged up or covered with condensation, ice, stick-
ers, etc.

→

Clear the dirt, fog, condensation, ice, stickers, etc.
(

• Front sensor temperature being outside of its opera-

tional range

→

Wait for a while until the area around the front sensor
has cooled down sufficiently.

When the warning light is illuminated:
Either the VSC (Vehicle Stability Control) system or PCS
(Pre-Collision system) is disabled or both are disabled.

→

To enable the PCS, enable both the VSC system and
PCS. (

P. 166, 188)

Tire pressure warning light

Indicates low tire pressure due to one of the following:
• Flat tire
• Natural causes
• The tire pressure warning system is malfunctioning

→

Immediately stop the vehicle in a safe place.
Handling method (

→

Warning light

Warning light/Details/Actions

«
...
292
293
294
295
296
...
»

Summary of Contents for COROLLA iM 2017

































































































































































































































































































































































































Reviews:

No comments