manualshive.com logo in svg

Toyota COROLLA iM 2017, Service Manual, Page: 289 / 384

Share
Download
Toyota COROLLA iM 2017 Service Manual Download Page 289

289

7-2. Steps to take in an emergency

7

Wh

en tro

uble

 a

ris

es

COROLLA iM_U (OM12K64U)

NOTICE

■

To prevent damage to the vehicle when towing using a wheel-lift type
truck

●

Do not tow the vehicle from the rear when the engine switch is in the
“LOCK” position or the key is removed.
The steering lock mechanism is not strong enough to hold the front wheels
straight.

●

When raising the vehicle, ensure adequate ground clearance for towing at
the opposite end of the raised vehicle. Without adequate clearance, the
vehicle could be damaged while being towed.

■

To prevent damage to the vehicle when towing with a sling-type truck

Do not tow with a sling-type truck, either from the front or rear.

■

To prevent damage to the vehicle during emergency towing

Do not secure cables or chains to the suspension components.

Summary of Contents for COROLLA iM 2017

































































































































































































































































































































































































Reviews:

No comments