manualshive.com logo in svg

Toyota COROLLA iM 2017, Service Manual, Page: 53 / 384

Share
Download
Toyota COROLLA iM 2017 Service Manual Download Page 53

53

1-1. For safe use

1

Fo
r 

safety and securi

ty

COROLLA iM_U (OM12K64U)

Child restraint systems are classified into the following 3 types
according to the age and size of the child:

■

Selecting an appropriate child restraint system

●

Use a child restraint system appropriate for the child until the child becomes
large enough to properly wear the vehicle’s seat belt.

●

If the child is too large for a child restraint system, sit the child on a rear seat
and use the vehicle’s seat belt. (

→

P. 26)

Types of child restraints

Rear facing 

⎯

 Infant seat/con-

vertible seat

Forward facing 

⎯

 Convertible

seat

Booster seat

Summary of Contents for COROLLA iM 2017

































































































































































































































































































































































































Reviews:

No comments