manualshive.com logo in svg

Toyota COROLLA iM 2017, Service Manual, Page: 80 / 384

Share
Download
Toyota COROLLA iM 2017 Service Manual Download Page 80

80

2. Instrument cluster

COROLLA iM_U (OM12K64U)

◆

Settings display

■

LDA (Lane Departure Alert) warning sensitivity (if equipped)

LDA warning sensitivity can be set to 2 different levels.

■

Eco Driving Indicator Light (if equipped)

Select to activate/deactivate the Eco Driving Indicator Light.

■

Language

Select to change the language on the display.

■

Units

Select to change the units of measure displayed on the multi-infor-
mation display.

■

Drive information 1/Drive information 2

Select to select up to 2 items that will be displayed on the Drive
information 1 screen and Drive information 2 screen respectively.
(

→

P. 78)

■

Scheduled Maintenance (U.S.A. only)

Select to reset the message indicating maintenance is required
after the required maintenance is performed. (

→

P. 227)

■

Initialize Display

Select to reset the meter display settings. (

→

P. 350)

Summary of Contents for COROLLA iM 2017

































































































































































































































































































































































































Reviews:

No comments