Toyota COROLLA iM 2017 Service Manual Download Page 89

Page: 89 / 384

3-2. Opening, closing and locking the doors

Op
eration

f each

compo

nen

COROLLA iM_U (OM12K64U)

◆

Door lock switch

Locks all the doors

Unlocks all the doors

◆

Inside lock buttons

Locks the door

Unlocks the door

The front doors can be opened
by pulling the inside handle
even if the lock buttons are in
the lock position.

Move the inside lock button to the lock position.

Close the door.

The door cannot be locked if either of the front doors is open and the
key is in the engine switch.

Unlocking and locking the doors from the inside

1
2

Locking the doors from the outside without a key

1
2

Summary of Contents for COROLLA iM 2017

































































































































































































































































































































































































Search results

Summary of Contents for COROLLA iM 2017

Reviews:

Toyota COROLLA iM 2017, Service Manual, Page: 89 / 384

Search results

Summary of Contents for COROLLA iM 2017

Reviews: