9
1.2.2.2 To change the power-line fuse
Before replacing the power-line fuse, make sure the multimeter is
disconnected from the AC power. You must be qualified personnel
to perform this action.
For continued protection against fire or instrument damage, only
replace with fuse of the same type and rating noted on the rear
panel. If the instrument repeatedly blows fuses, locate and correct
the cause of the trouble before replacing the fuse.
(Fuse to replace:
250VT250mA)
Verify that the power-line fuse is good. Replace the fuse if it is damaged.
Follow the steps below to change the fuse.
【
Step 1
】
Verify that the DMM is disconnected as shown in
Figure 1-14
.
Figure 1-14
WARNING
!
