36
How to use 2ND measurement
1.
Press one of the measurement function keys to select a primary measurement.
2.
Press SHIFT+ENTER to enter 2ND submenu.
3.
Use
◁
or
▷
button to locate a desired secondary measurement, and press ENTER
to select it.
4.
Use
◁
or
▷
button to locate a desired secondary configuration, and then press
ENTER to select it. If you need to set another configuration, repeat the operation
from Pressing SHIFT+ENTER.
5.
Observe and take readings on the display. The upper row display is the primary
measurement and the lower row display is the secondary measurement.
※
Note: To execute the 2nd function with DCI, applying the range at 1A or up.
Figure 2-14
Remote Interface Operation
To set 2nd through the remote interface, use the following commands:
These commands are used for selecting two functions on the 2nd applications. 1
stands for the selected function which will act on the main display. 2 stands for the
selected function which will act on the secondary display.
Upper Row Display
Lower Row Display
