19
1.3.2 The Display
DL-1060 has a dual-LCD-display for a better view. There are two rows in the
dual-display screen. The upper row (Primary) displays readings and units. A maximum
11 characters are allowed for upper row LCD display. The lower row (Secondary)
displays range of the measurements, condition, the secondary readings & units or
information about an ongoing configuration. A maximum 16 characters are allowed for
lower row LCD display. There are additional annunciators at upper side and right side
of the display screen for indicating the state or the condition of an ongoing
measurement. They are explained individually in the following sections.
Figure 1-27
1.3.2.1 Annunciators
⚫
ADR: Indicates the multimeter is via GPIB Interface.
⚫
RMT (REMOTE): Indicates the remote state.
⚫
MAN: Indicates the manual range is taken.
⚫
TRIG: Shows the single triggering or the External Trigger is enabled.
⚫
HOLD: Indicates reading hold function is enabled.
⚫
MEM: Indicates the using of internal memory.
⚫
MATH: I
ndicates the “MATH” operation is taken.
⚫
FILT: The digital filter is started.
⚫
SHIFT: Indicates SHIFT button is pressed.
⚫
ERR: Error occurs.
⚫
4W: Indicates 4
–
wire mode is selected for resistance measurement.
⚫
●
)
)
)
: Indicates the continuity testing is enabled.
⚫
OFF: Indicates the front panel display is turned off.
⚫
RAT: I
ndicates the “RATIO” operation is taken.
⚫
2nd
:
Indicates 2ND function in use.
Upper Row Display
Lower Row Display