121
DISPlay?
Query the display setting.
Returns “0” (OFF) or “1” (ON).
DISPlay:TEXT <
quoted string
>
Show a message on the front panel display. The allowed message can be up to 16 characters
in the lower row display; any additional characters will be truncated.
DISPlay:TEXT?
Query the message sent to the front panel display.
DISPlay:TEXT:CLEar
Clear the message shown on the front panel display.
SYSTem:BEEPer
Issue a single beeping tone.
SYSTem:BEEPer:STATe {OFF|ON}
Disable or enable the beeper.
SYSTem:BEEPer:STATe?
Query the beeper mode. R
eturns “0” (OFF) or “1” (ON).
SYSTem:ERRor?
Query the multimeter’s error queue. Up to 20 errors can be stored in the queue. Errors are
retrieved in first-in-first-out (FIFO) order. Each error string may contain up to 80 characters.
SYSTem:VERSion?
Query the present SCPI version.
L0
Set to the default identification string.
L1
Set to the compatible identification string.
DATA:POINts?
Query the number of readings stored in the multimeter’s internal memory.
*RST
Reset the multimeter to the power-on configuration. This command cannot clear the error
queue.