43
Figure 3-4
For READINGS setting:
1.
After enabling the filter (see above), use
◁
and
▷
button s to locate
“
READINGS
”
.
Press ENTER to select it. Use
◁
and
▷
to move through the digits and
△
and
▽
buttons to increase or decrease the number to a desired to a value (from 2 to
100). Press ENTER to set the value. Press ENTER in
“
RUN
”
to start reading as
shown in
Figure 3-5
.
Figure 3-5
Remote Interface Operation
Use the following commands to set your digital filter:
SENSe:AVERage:TCONtrol {MOVing|REPeat}
SENSe:AVERage:TCONtrol?
SENSe:AVERage:COUNt {<
value
>|MINimum|MAXimum}
SENSe:AVERage:COUNt? [MINimum|MAXimum]
SENSe:AVERage:STATe {OFF|ON}
SENSe:AVERage:STATe?
