112
CONFigure:CONTinuity
Preset and configure for a continuity measurement. This command does not initiate the
measurement. The range and resolution are fixed at 1kΩ and 5½ digit
s respectively.
CONFigure:DIODe
Preset and configure for a diode measurement. This command does not initiate the
measurement. The range and resolution are fixed at 1Vdc with 1mA current source and 5½
digits respectively.
CONFigure:TEMPerature
Preset and configure for a RTD measurement. This command does not initiate the
measurement. The resolution is fixed at 6½ digits.
CONFigure:TCOuple
Preset and configure for a thermocouple measurement. This command does not initiate the
measurement. The resolution is fixed at 6½ digits.
CONFigure?
Query a recent condition of function, and return a quoted string.
B.5 The Measurement Configuration Command
[SENSe:]
FUNCtion “<
function
>”
Select a measurement function and enclose it in quotes in the command string (FUNC
“VOLT:DC”). Use one of the following strings.
VOLTage:DC
FREQuency
VOLTage:DC:RATio
PERiod
VOLTage:AC
CONTinuity
CURRent:DC
DIODe
CURRent:AC
TCOuple
RESistance (for 2-wire ohms)
TEMPerature
FRESistance (for 2-wire ohms)
CAPacitance
[SENSe:]FUNCtion?
Query the measurement function and return a quoted string.
[SENSe]:FUNCtion[1/2] "<function>"
Sets DMM to the measurement function listed in the function parameter. The function must be
enclosed in quotes in the command string (
FUNC “VOLT:DC”
) for Example. In addition,
Parameters [1/2] means that use 1 for primary display, and 2 for secondary display. The
followings are the valid commands.
※
Note: Using FUNC without a 1 or 2 will default to 1 for the primary display.