99
⚫
-112 Program mnemonic too long
A command header with too many characters was received.
⚫
-113 Undefined header
An invalid command was received.
⚫
-121 Invalid character in number
An invalid character was found in the number specified for a parameter value.
⚫
-123 Numeric overflow
A numeric parameter with exponent larger than 32000 was found.
⚫
-124 Too many digits
A numeric parameter was found whose mantissa contained more than 255 digits, excluding leading
zeros.
⚫
-131 Invalid suffix
A suffix was incorrectly specified for a numeric parameter.
⚫
-138 Suffix not allowed
A suffix was received following a numeric parameter which does not accept a suffix.
⚫
-148 Character not allowed
A discrete parameter was received but a character string or a numeric parameter was expected.
⚫
-151 Invalid string data
An invalid character string was received.
⚫
-158 String data not allowed
A character string was received but not allowed for the command.
⚫
-160~-168 Block data errors
Block data is not acceptable.
⚫
-170~-178 Expression errors
The meter does not accept mathematical expression.
⚫
-211 Trigger ignored
A Group Execute Trigger (GET) or *TRG was received but the trigger was ignored.
⚫
-213 Trigger deadlock
A trigger deadlock occurs when the trigger source is BUS and a READ? Command is received
⚫
-214 Init Ignored
An INITiate command was received but could not be executed because a measurement was already in
progress. Send a device clear to halt a measurement in progress and place the
meter in the “idle” state.
