Tektronix RSA6100A Series, Help Manual

Page: 221 / 415

Pulsed RF > Pulse Trace Display Pulse Trace Settings
Item Display element Description
1
Optimized indicator The check mark indicator in the upper, left-hand corner of the display shows
when the Pulse Trace display is the optimized display.
2 Result Use this list to select the measurement to show. The measurement chosen
here selects the same result to be displayed in the Statistics view and
highlighted in the Table view. Selecting a result in any of these views causes
the same result to be selected in all of them.
3 Pulse Selects which pulse result is shown. Like the Result, this selection is shared
with the Statistics and Table views. The maximum number of pulses that
can be measured is limited to 10000.
4 Pulse threshold indicator This green triangle indicates the power threshold used to detect pulses. See
Settings > Params > Power threshold to detect pulses.
5 Autoscale Set the axes to values that show all trace points.
6 Horizontal offset and scale Located along the bottom edge of the trace display, these controls specify the
offset and scale on the horizontal axis.
7 Top of graph adjustment Sets the power level shown at the top of the graph. If the number is greater
than the Ref Level, a white line will appear in the graph to indicate the Ref
Level.
8 Vertical scale
Sets the vertical scale value.
xxx
Changing the Pulse Trace Display Settings (see page 209)
Pulse Trace Settings
Menu Bar: Setup > Settings
Front Panel / Application Toolbar: Settings
The Setup settings for the Pulse Trace display are shown in the following table.
Settings tab Description
Params (see page 212) Speci fi es several parameters that control how pulses are counted and de fi ned.
De fi ne (see page 214) Speci fi es parameters that control where measurements are taken on a pulse.
Levels (see page 219) Speci fi es parameters that control the method and levels used to calculate some pulse
values.
Freq Estimation (see
page 220) Speci fi es the reference used for computing frequency error.
Scale (see page 221) Speci fi es the vertical and horizontal scale settings.
Prefs (see page 222) Speci fi es whether on not certain display elements are shown.
xxx
RSA6100A Series Real-Time Spectrum Analyzers Help
209