RF Measurements > Spurious
Limits Tab
5.
For ranges that you wish to test, verify that the Enabled box is checked. Click
OK
.
6.
Select a range you want to test from the
Range
drop-down list.
7.
Select the desired
Mask
type from the drop-down list.
8.
Set the limits as desired in the
Absolute ampl
and
Relative ampl
boxes. The values you can edit
depend on the mask type you select.
9.
Repeat steps 5, 6 and 7 for each range you want to test.
10.
Verify that the
Threshold
and
Excursion
values on the
tab are set as required.
These are the values that de
fi
ne a spur.
11.
Press the close box to remove the Settings panel.
12.
Click
Run
to begin testing.
166
RSA6100A Series Real-Time Spectrum Analyzers Help
Summary of Contents for RSA6100A Series
Page 2: ......
Page 12: ...Table of Contents viii RSA6100A Series Real Time Spectrum Analyzers Help...
Page 28: ...Orientation Elements of the Display 16 RSA6100A Series Real Time Spectrum Analyzers Help...
Page 307: ...Search Limits Testing Define Tab Search RSA6100A Series Real Time Spectrum Analyzers Help 295...
